Analog Signal Converter, Duplicator attachement

Analog Signal Converter, Duplicator - D1052

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
0/4-20mA, 0/1-5 V, 0/2-10 V Input-Output Signal linear or reverse
Duplicated output for single input (D1052X)
Adder, Subtractor, low/high Selector (D1052Y)
High Accuracy, μP controlled A/D converter
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
Fully programmable operating parameters
High Reliability, SMD components
High Density, two channels per unit
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The D1052S converts a voltage or current input from separately powered source, located in Hazardous Location, and repeats, with isolation, the signal to drive a Safe Area load. Output Signal can be direct or reverse. All settings are easily programmable via software.

D1053_DTS0041_EN.pdf D1052_ISM0015_EN.pdf

No Product Accessories.

Model

Power Bus Enclosure

Analog Signal Converter, Duplicator - D1052

D1052

Configurations