Field Bud Isolating Repeater attachement

Field Bud Isolating Repeater - D1061S-077

Input/Output from Zone 0 (Zone 20), installation in Zone 2
RS422 / RS485 Hazardous Area I.S. Signal
RS232 / RS422 / RS485 Safe Area Signal
Transmission speed up to 1.5 Mbit/s
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
In-field programmability by DIP Switch
High Reliability, SMD components
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The DIN-Rail RS422 / RS485 Fieldbus Isolating Repeater type D1061S-077 is used to separate Intrinsically Safe RS422 / RS485 equipment located in Hazardous Area from a RS232 / RS422 / RS485 controller located in Safe Area. Transmission speed is DIP-switch adjustable from 1.2 Kbit/s up to 1.5 Mbit/s.

Terminating impedance is DIP-switch selectable inside the unit (200 Ω value) for both sides of communication lines (Hazardous Area and Safe Area side). RS422 / RS485 connection in Safe Area is provided both on terminal block and SUB D 9 poles female connector on the unit. RS232 connection is provided on SUB D 9 poles female connector only. The module also provides a shield terminal block for connecting cable shielding on Hazardous Area side.

D1061-077%20_DTS0352_EN.pdf D1061-077_ISM0146_EN.pdf

No Product Accessories.

Power Bus Enclosure

Field Bud Isolating Repeater - D1061S-077

D1061S-077

Configurations