SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail attachement

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail - D1030

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
NO/NC contact/proximity Detector Input
Two SPDT Relay Output Signals
SPDT Relay Output for fault detection on single channel version
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
In-field programmability by DIP Switch
High Reliability, SMD components
High Density, two channels per unit
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier

The Switch/Proximity Detector Repeater type D1030S is a DIN Rail unit with one channel. The unit can be configured for contact or proximity detector, NO or NC and for NE or ND SPDT relay output contact. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

The Switch/Proximity Detector Repeater type D1030D is a DIN-Rail unit with two independent channels. The unit can be configured for contact or proximity detector, NO or NC and for NE or ND SPDT relay output contact. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

D1030_DTS0020_EN.pdf D1030_ISM0008_EN.pdf

No Product Accessories.

Number of Channels

Power Bus enclosure

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail - D1030

D1030

Configurations

Related Products

SIL 2 Powered Isolating Driver Smart-Hart compatible DIN-Rail

4 CH, Switch/Proximity Detector Repeater. Transistor Out., SIL 2

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail