SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail attachement

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail - D1033

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
NO/NC contact/proximity Detector Input
Four opto isolated voltage free transistorOutput Signals
Common negative or positive output both accepted in standard version D1033
Transistor Output for fault detection on dual channel version
Line fault detection with common signalling available when using Power Bus enclosure
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
In-field programmability by DIP Switch
High Reliability, SMD components
High Density, four channels per unit
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The Switch/Proximity Detector Repeater type D1033D is a DIN Rail unit with two independent and isolated channels. The unit can be configured for contact or proximity detector, NO or NC and for NC or NO optocoupled open collector transistor output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

The Switch/Proximity Detector Repeater type D1033Q is a DIN Rail unit with four independent and isolated channels. The unit can be configured for contact or proximity detector, NO or NC and for NC or NO optocoupled open collector transistor output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

D1033_DTS0151_EN.pdf D1033_ISM0043_EN.pdf

No Product Accessories.

Number of Channels

Common Negative & Positive

Power Bus enclosure

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail - D1033

D1033

Configurations

Related Products

Frequency-Pulse Isolating Repeater DIN-Rail

4 CH, Switch/Proximity Detector Repeater. Transistor Out., SIL 2

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail