Linearity: 2", 2.8", 3.8", 4.7" Ranges - ±1.0% Full Scale, 10" to 25" Ranges - ±0.5% Full Scale, 30" to 80" Ranges - ±0.25% Full Scale
Repeatability - ±0.02% Full Scale
Construction - Thermoplastic Body
Wire Rope - Ø.018 Jacketed Stainless Steel
Weight - 6.3 oz.
Connections - Electrical cable, or plastic connector
Life: Ranges to 4.7" - 2,000,000 full stroke cycles, Ranges 10" to 25" - 500,000 full stroke cycles, Ranges 30" to 80" - 250,000 full stroke cycles
The UniMeasure JX-PA Series linear position transducer with analog output is primarily for use in moderate duty applications in wet or dry environments. The chemical resistant thermoplastic case of the transducer provides optional IP-65 (NEMA 4X) ingress protection for applications where exposure to wash down, rain, oil and other liquids may occur.
The sealed case is achieved through the use of O-rings and a low friction shaft seal. An integral dust wiper insures that the wire rope stays clear of debris as it is extracted and retracted. Electrical connection options include body mounted sealed plastic connector with mating connector or a sealed bulkhead fitting and three conductor electrical cable of user specified length.
In addition, the wire rope exit direction may be specified at time of order or may be user adjusted at time of installation. Typical applications include but are not limited to forklift positioning, suspension travel measurement, valve positioning, liquid level measurement, flood and irrigation gate monitoring, and saw blade positioning.
