Selectable CJC: internal PT1000, external RTD or fixed
Burnout/internal/cjc/in sensor fault monitor
Alarm output with user-settable trip points
Modbus RTU RS-485 for monitor & configuration
Fully programmable operating parameters
High Accuracy, µP controlled A/D converter
Three port isolation, Input/Output/Supply
The Sink-Out Temperature Converter D6072-099 accepts a low level dc signal from millivolt, thermocouple or resistance/RTD or transmitting potentiometer sensor and converts, with isolation, the signal to drive a load, suitable for applications requiring SIL 2 level in safety related systems for high risk industries. Output signal can be direct or reverse. Modbus RTU RS-485 output is available on Bus connector. Cold junction compensation can be programmed as Internal: provided by an internal PT1000 sensor; Fixed: to a usercustomizable temperature value; External remote: ext. RTD placed away, on a support terminal board; External local: ext. RTD placed close to the module terminal block; Other: connecting compensation RTD to one of the two ch. For D6072D-099 module: duplicator function provides two independent outputs from one single input. Output function can be configured as: average, subtractor, low/high or redundancy selector. Modules are provided with alarm function, which is available via solid state contact output.
